大神教你处理Linux服务器网卡识别失败的方法

公司IDC机房里的一台线上服务器硬件报警，最后排查发现服务器主板坏了，随即联系厂商进行更换主板，最后更换后，登录服务器，发现网卡绑定及ip信息都在，但是ip却ping不通了，进一步排查，重启网卡，提示之前的eth0和eth1网卡设备发现不了了，也就是说服务器主板更换后，之前的网卡设备都识别不了了！

主板更换后，重启并登陆服务器，发现之前的网卡设备（eth0、eth1、eth2、eth3）都没有了！

[root@kevin01 ~]# ifconfig -a
bond0     Link encap:Ethernet  HWaddr 08:94:EF:5E:AE:72 
          inet addr:192.168.10.20  Bcast:192.168.10.255  Mask:255.255.255.0
          inet6 addr: fe80::a94:efff:fe5e:ae72/64 Scope:Link
          UP BROADCAST RUNNING MASTER MULTICAST  MTU:1500  Metric:1
          RX packets:75582 errors:0 dropped:0 overruns:0 frame:0
          TX packets:58537 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:5890233 (5.6 MiB)  TX bytes:4390537 (4.1 MiB)
 
lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:26 errors:0 dropped:0 overruns:0 frame:0
          TX packets:26 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:1983 (1.9 KiB)  TX bytes:1983 (1.9 KiB)
 
usb0      Link encap:Ethernet  HWaddr 0A:94:EF:5E:AE:79 
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

之前的网卡设备和bond绑定的配置信息都还在（bond绑定网卡操作：http://www.cnblogs.com/kevingrace/p/7966511.html）

[root@kevin ~]# cd /etc/sysconfig/network-scripts/
[root@kevin network-scripts]# ls
ifcfg-bond0  ifcfg-lo     ifdown-ib    ifdown-ppp     ifup-aliases  ifup-ipv6   ifup-ppp       init.ipv6-global
ifcfg-eth0   ifcfg-usb0   ifdown-ippp  ifdown-routes  ifup-bnep     ifup-isdn   ifup-routes    net.hotplug
ifcfg-eth1   ifdown       ifdown-ipv6  ifdown-sit     ifup-eth      ifup-plip   ifup-sit       network-functions
ifcfg-eth2   ifdown-bnep  ifdown-isdn  ifdown-tunnel  ifup-ib       ifup-plusb  ifup-tunnel    network-functions-ipv6
ifcfg-eth3   ifdown-eth   ifdown-post  ifup           ifup-ippp     ifup-post   ifup-wireless
 
[root@kevin ~]# /etc/init.d/network restart
......

报错说没有发现eth0和eth1网卡

[root@kevin ~]# ipdown eth0

报错提示说没有发现eth0网卡

这是因为服务器更换了主板或网卡，mac地址改变所导致的。系统加载网卡驱动后会去读一个文件（即/etc/udev/rules.d/70-persistent-net.rules），这个文件是一个缓冲文件，包含了网卡的mac地址，因为更换了主板，网卡的mac地址也变了，但是这个文件的mac地址还没变，还是之前坏了的主板的上面的网卡的MAC地址，这样系统在加载网卡，读取这个文件的时候读取的是之前网卡的mac地址，和现在更换后主板后的网卡mac地址不一致导致混乱，所以就识别不了当前网卡；

一般来说，删除/etc/udev/rules.d/70-persistent-net.rules文件（或者把这个文件重新命名），重启服务器就可以解决了，重启后会重新生成这个文件，

这样就顺利解决这个问题了！这里注意下，由于我的这台服务器绑定了网卡，所以重启网卡后，还需要进行modprobe命令使得网卡绑定生效，大致步骤如下：

# mv /etc/udev/rules.d/70-persistent-net.rules /etc/udev/rules.d/70-persistent-net.rules.bak20180307
# init 6 

重启服务器后，查看/etc/udev/rules.d/70-persistent-net.rules文件，发现没有eth0、eth1、eth3、eth4的网卡信息（mac和设备名称）

[root@kevin network-scripts]# cat /etc/udev/rules.d/70-persistent-net.rules
# This file was automatically generated by the /lib/udev/write_net_rules
# program, run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single
# line, and change only the value of the NAME= key.
  
# PCI device 0x14e4:0x1657 (tg3)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="****", ATTR{type}=="1", KERNEL=="eth*"
  
# PCI device 0x14e4:0x1657 (tg3)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="****", ATTR{type}=="1", KERNEL=="eth*"
  
# PCI device 0x14e4:0x1657 (tg3)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="****", ATTR{type}=="1", KERNEL=="eth*"
  
# PCI device 0x14e4:0x1657 (tg3)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="****", ATTR{type}=="1", KERNEL=="eth*"
  
然后重启网卡等操作
[root@kevin ~]# modprobe bonding
[root@kevin ~]# /etc/init.d/network restart
[root@kevin ~]# modprobe bonding

接着ifconfig查看，发现eth0、eth1、eth2、eth3网卡设备都能识别了

[root@kevin ~]# ifconfig -a
bond0     Link encap:Ethernet  HWaddr 08:94:EF:5E:AE:72
          inet addr:192.168.10.20  Bcast:192.168.10.255  Mask:255.255.255.0
          inet6 addr: fe80::a94:efff:fe5e:ae72/64 Scope:Link
          UP BROADCAST RUNNING MASTER MULTICAST  MTU:1500  Metric:1
          RX packets:108809 errors:0 dropped:0 overruns:0 frame:0
          TX packets:84207 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:8471111 (8.0 MiB)  TX bytes:6322341 (6.0 MiB)
  
eth0      Link encap:Ethernet  HWaddr 08:94:EF:5E:AE:72
          UP BROADCAST RUNNING SLAVE MULTICAST  MTU:1500  Metric:1
          RX packets:38051 errors:0 dropped:0 overruns:0 frame:0
          TX packets:14301 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:2869726 (2.7 MiB)  TX bytes:944276 (922.1 KiB)
          Interrupt:16
  
eth1      Link encap:Ethernet  HWaddr 08:94:EF:5E:AE:72
          UP BROADCAST RUNNING SLAVE MULTICAST  MTU:1500  Metric:1
          RX packets:69158 errors:0 dropped:0 overruns:0 frame:0
          TX packets:68615 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:5469647 (5.2 MiB)  TX bytes:5279012 (5.0 MiB)
          Interrupt:17
  
eth2      Link encap:Ethernet  HWaddr 08:94:EF:5E:AE:74
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
          Interrupt:16
  
eth3      Link encap:Ethernet  HWaddr 08:94:EF:5E:AE:75
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
          Interrupt:17
  
lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:26 errors:0 dropped:0 overruns:0 frame:0
          TX packets:26 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:1983 (1.9 KiB)  TX bytes:1983 (1.9 KiB)
  
usb0      Link encap:Ethernet  HWaddr 0A:94:EF:5E:AE:79
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

在查看/etc/udev/rules.d/70-persistent-net.rules文件，发现eth0、eth1、eth2、eth3网卡及其mac地址信息都有了

[root@kevin ~]# cat /etc/udev/rules.d/70-persistent-net.rules
# This file was automatically generated by the /lib/udev/write_net_rules
# program, run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single
# line, and change only the value of the NAME= key.
  
# PCI device 0x14e4:0x1657 (tg3)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="08:94:ef:5e:ae:75", ATTR{type}=="1", KERNEL=="eth*", NAME="eth3"
  
# PCI device 0x14e4:0x1657 (tg3)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="08:94:ef:5e:ae:72", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
  
# PCI device 0x14e4:0x1657 (tg3)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="08:94:ef:5e:ae:73", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"
  
# PCI device 0x14e4:0x1657 (tg3)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="08:94:ef:5e:ae:74", ATTR{type}=="1", KERNEL=="eth*", NAME="eth2"

接着尝试ping其他机器

[root@kevin ~]# ping 192.168.10.23
PING 192.168.10.23 (192.168.10.23) 56(84) bytes of data.
64 bytes from 192.168.10.23: icmp_seq=1 ttl=64 time=0.030 ms
64 bytes from 192.168.10.23: icmp_seq=2 ttl=64 time=0.016 ms
64 bytes from 192.168.10.23: icmp_seq=3 ttl=64 time=0.016 ms

如果ping不通的话，多执行下面命令

[root@kevin ~]# modprobe bonding

温馨提示：有时候重启后还是出现以上情况，对比之前的/etc/udev/rules.d/70-persistent-net.rules文件，新的文件mac地址和name已经改变，name=eth0,和之前name=em1的名字不同；