WhateverGreen 1.5.4黑苹果显卡驱动最新版
v1.5.4
- Added the fix for the short period garbled screen after the system boots on Ice Lake platforms. (by @0xFireWolf, also thanks @m0d16l14n1 and @kingo132)
v1.5.3
- Added
no-gfx-spoof
to avoid forcingdevice-id
values from PCI I/O. - Added the backlight smoother submodule that makes brightness transitions smoother on Intel IVB+ platforms. (by @0xFireWolf)
- MMIO Register Access submodules are now available on Intel IVB+ platforms. (by @0xFireWolf)
- Improved ASUS-made AMD R9 380 GPU identification
- Fixed
applbkl
property with<00 00 00 00>
value failing to disable backlight patches - Note: This release requires Lilu v1.5.6 or later.
v1.5.2
- Added
device-id
spoofing support for AMD graphics
v1.5.1
- Added constants required for macOS 12 update
- Added Intel Arrandale graphics support on 10.6 and 10.7 64-bit
v1.5.0
- Fixed AMD WX-4170 name for 67E0 device id
- Added NVIDIA driver error logging with
-ngfxdbg
v1.4.9
- Added per-GPU disabling API: inject
disable-gpu
to disable - Added per-GPU disabling kernel version specification: inject
disable-gpu-min
/disable-gpu-max
to select kernel version to disable (inclusive range) - Added IGPU disabling API: inject
disable-gpu
to disable or use-wegnoigpu
boot argument - Optimised Rocket Lake startup as IGPU is unsupported
v1.4.8
- Fixed debug messages from cursor manipulation with NVIDIA GPUs on macOS 11
v1.4.7
- Implemented
unfairgva
device property (use<01 00 00 00>
value for MP5,1 to enable streaming DRM)
v1.4.6
- Backlight registers fix replaces the previous Coffee Lake backlight fix and is now available on Intel Ice Lake platforms.
- Boot argument
igfxcflbklt=1
as well as device propertyenable-cfl-backlight-fix
are deprecated and replaced by-igfxblr
andenable-backlight-registers-fix
. - Add max pixel clock override through
-igfxmpc
boot argument orenable-max-pixel-clock-override
andmax-pixel-clock-frequency
device properties - Moved PNLF samples to OpenCore
v1.4.5
- Enabled loading in safe mode (mainly for AGDP fixes)
- Resolved an issue that the maximum link rate fix is not working properly on Intel Comet Lake platforms. (Thanks @CoronaHack)
- Allowed enabling
igfxrpsc
on Comet Lake - Fixed failed to route IsTypeCOnlySystem warning from Skylake to Ice Lake
v1.4.4
- Extended the maximum link rate fix: Now probe the rate from DPCD automatically and support Intel ICL platforms. (by @0xFireWolf)
- Fixed an issue that LSPCON driver causes a page fault if the maximum link rate fix is not enabled. (by @0xFireWolf)
v1.4.3
- Added CFL and CML P630
- Added MacKernelSDK with Xcode 12 compatibility
- Fixed loading on macOS 10.11 and earlier
v1.4.2
- Fixed
disable-external-gpu
(-wegnoegpu
) on some systems - Disabled RPS control patch by default due to a bug in 10.15.6 IGPU drivers
- Replaced
igfxnorpsc=1
withigfxrpsc=1
to opt-in RPS control patch - Support all valid Core Display Clock (CDCLK) frequencies to avoid the kernel panic of “Unsupported CD clock decimal frequency” on Intel ICL platforms. (by @0xFireWolf)
- Fix the kernel panic caused by an incorrectly calculated amount of DVMT pre-allocated memory on Intel ICL platforms. (by @0xFireWolf)
v1.4.1
- Added
igfxmetal=1
boot argument (andenable-metal
property) to enable Metal on offline IGPU - Fixed applying patches on CometLake IGPUs, thx @apocolipse
- Added constants required for 11.0 update
- Added the use of RPS control for all the command streamers on IGPU (disabled via
igfxnorpsc=1
) - Add
-igfxvesa
to disable Intel Graphics acceleration. - Fix black screen on igfx since 10.15.5
- Add workaround for rare force wake timeout panics on Intel KBL and CFL.
- Add Intel Westmere graphics support.
v1.4.0
- Added 0x3EA6, 0x8A53, 0x9BC4, 0x9BC5, 0x9BC8 IGPU device-id
- Fixed
framebuffer-conX-alldata
patching regression - Added
disable-hdmi-patches
device property alias to-igfxnohdmi
v1.3.9
- Added
igfxdumpdelay
boot argument to delay-igfxdump
in ms - Partially fix ICL framebuffer patching
- Add support to injecting
Force_Load_FalconSMUFW
from OpenCore - Disabled automatic enabling of GVA for Polaris on 10.13 and lower
- Replaced -radnogva argument with radgva=0/1 to force GVA for Polaris
- Added
wegtree=1
boot argument (rebuild-device-tree
property) to force device renaming on Apple FW
v1.3.8
- Added
igfxfw=2
boot argument andigfxfw
IGPU property to load Apple GuC firmware - Added
igfxpavp=1
boot argument (andigfxpavp
property) to force enable PAVP output - Added
igfxfcms=1
boot argument (andcomplete-modeset
property) on Skylake and Apple - Improved performance with Lilu 1.4.3 APIs
- Added
-igfxfbdbg
boot argument to debug IGPU framebuffer (debug builds only) - Added
igfxagdc=0
boot argument anddisable-agdc
IGPU property to disable AGDC - Added
igfxonln=1
boot argument andforce-online
IGPU property force online status for all displays - Added
igfxonlnfbs=MASK
boot argument andforce-online-framebuffers
IGPU property to override display status
v1.3.7
- Improved the maximum link rate fix: Now correct the value read from extended DPCD as well. (by @0xFireWolf)
- Improved firmware loading handling on 10.15.4 (may fix booting issues on KBL+)
- Improved support for Comet Lake IGPUs (thx @stormbirds)
v1.3.6
- Enabled CoreLSKD streaming patches by default for AMD hardware DRM on Ivy Bridge
- Repurposed 64 bit for FP 2.x streaming hardware accelerated streaming patches (can be used as
shikigva=80
) - Fixed accelerator name update logic for X4xxx kexts
- Fixed Verde IOGVACodec injection to make hardware video decoder work
- Enable software TV+ decoding on all CPUs without IGPU (
shikigva=256
) - Added HEVC capabilities to AMD6 decoders for all GPUs (disabled by
-radnogva
ordisable-gva-support
) - Added HW decoder device-id spoofing via
-radcodec
boot-arg, by @osy86
v1.3.5
- Added Lilu 1.4.0 support, which is now the minimum supported version
- Dropped legacy boot arguments (
-shikigva
,-shikifps
) - Fixed handling
agdpmod
GPU property (in IGPUs and in conjunction with boot-arg) - Added
-wegtree
boot argument to force device renaming - Fixed FairPlay DRM playback patches on 10.15
- Added
shikigva
andshiki-id
aliases in IORegistry - Added
applbkl
aliases to IORegistry (data, 32-bit) - Added
applbkl-name
andapplbkl-data
IORegistry data keys to provide custom backlight data - Fixed applying CoreFP patches on Apple firmware, when they are not needed
- Added
shikigva=16
(repurposed) property to use AMD hardware DRM decoder in select apps - Added
shikigva=128
(repurposed) property to use hardware decoder for FairPlay 1.0 (can be used asshikigva=144
) - Do not disable DRM patches when
shikigva
is used even on Apple hardware for MacPro5,1 support
v1.3.4
- Added support for disabled AppleGraphicsDevicePolicy in AMD drivers on 10.15.1
- Added basic support for
-radcfg
and-radgl
on AMD Navi GPUs
v1.3.3
- Rework backlight panel info injection to fix Mac issues
v1.3.2
- Added more GPUs for detection
- Enable IGPU graphics kernel panic workaround on 10.14.4+ on SKL
v1.3.1 更新
- Fixed an issue that LSPCON driver fails to set the mode after the adapter power is off, i.e. sleep/wake up cycle.
- Unified release archive names
- Enforce complete IGPU modeset on Kaby Lake and newer (overridable by igfxfcmsfbs bootarg or
complete-modeset-framebuffers device property) - Disable VRAM testing on AMD GPUs on 10.14.4+ (based on vladie’s patch)
资源信息
- 软件名称:WhateverGreen
- 软件语言:英文
- 软件分类:驱动
下载地址
版本- 1.5.4
大小- 535.6KB
更新日期- 2021-10-04
-
版本- 1.5.3
大小- 533.3KB
更新日期- 2021-09-07
-
版本- 1.5.2
大小- 522.2KB
更新日期- 2021-08-06
-
版本- 1.5.1
大小- 521.5 KB
更新日期- 2021-07-04
-
版本- 1.5.0
大小- 520.8 KB
更新日期- 2021-06-08
-
版本- 1.4.9
大小- 519.8 KB
更新日期- 2021-04-06
-
版本- 1.4.8
大小- 520.7 KB
更新日期- 2021-03-02
-
版本- 1.4.7
大小- 514.8 KB
更新日期- 2021-02-03
-
版本- 1.4.6
大小- 511.9KB
更新日期- 2021-01-05
-
版本- 1.4.5
大小- 491.6 KB
更新日期- 2020-12-08
-
版本- 1.4.4
大小- 475.7 KB
更新日期- 2020-11-04
-
版本- 1.4.3
大小- 475.7 KB
更新日期- 2020-10-06
-
版本- 1.4.2
大小- 466.9 KB
更新日期- 2020-09-08
-
版本- 1.4.1
大小- 460.1 KB
更新日期- 2020-08-04
-
版本- 1.4.0
大小- 444.3 KB
更新日期- 2020-06-02
-
版本- 1.3.9
大小- 444.3 KB
更新日期- 2020-05-04
-
版本- 1.3.8
大小- 443.8 KB
更新日期- 2020-04-07
-
版本- 1.3.7
大小- 440.7 KB
更新日期- 2020-02-21
-
版本- 1.3.6
大小- 440.5 KB
更新日期- 2020-01-14
-
版本- 1.3.5
大小- 429.5 KB
更新日期- 2019-12-18
-
版本- 1.3.4
大小- 427 KB
更新日期- 2019-10-31
-
版本- 1.3.3
大小- 426 KB
更新日期- 2019-10-07
-
版本- 1.3.2
大小- 424 KB
更新日期- 2019-09-20
-
版本- 1.3.1
大小- 423 KB
更新日期- 2019-08-06
原创文章,作者:ItWorker,如若转载,请注明出处:https://blog.ytso.com/181230.html