这是kubernetes二进制部署的第二篇
如果没有看过前面第一篇的朋友可以看看下面的:
Kubernetes二进制部署(一)单节点部署
实验环境:
负载均衡:
Nginx1:192.168.35.104/24
Nginx2:192.168.35.105/24
Master节点:
master1:192.168.35.100/24
master2:192.168.35.103/24
Node节点:
node1:192.168.35.101/24
node2:192.168.35.102/24
master02部署
1、关闭防火墙
[root@localhost ~]# systemctl stop firewalld.service
[root@localhost ~]# setenforce 0
2、在master1上操作
(1)复制kubernetes目录到master2
[root@localhost k8s]# scp -r /opt/kubernetes/ root@192.168.35.103:/opt
The authenticity of host '192.168.35.103 (192.168.35.103)' can't be established.
ECDSA key fingerprint is SHA256:VBIpN6lYzzdqZmVfp5cGBOYgDBwYuVkI55sXRAz2C/s.
ECDSA key fingerprint is MD5:fe:66:e7:bd:10:1d:ce:1b:4b:82:9e:e0:99:23:d4:5f.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.35.103' (ECDSA) to the list of known hosts.
root@192.168.35.103's password:
token.csv 100% 84 55.0KB/s 00:00
kube-apiserver 100% 934 1.0MB/s 00:00
kube-scheduler 100% 94 122.4KB/s 00:00
kube-controller-manager 100% 483 393.2KB/s 00:00
kube-apiserver 100% 184MB 91.9MB/s 00:02
kubectl 100% 55MB 72.2MB/s 00:00
kube-controller-manager 100% 155MB 77.3MB/s 00:02
kube-scheduler 100% 55MB 74.8MB/s 00:00
ca-key.pem 100% 1679 1.5MB/s 00:00
ca.pem 100% 1359 984.7KB/s 00:00
server-key.pem 100% 1675 1.0MB/s 00:00
server.pem 100% 1643 338.6KB/s 00:00
(2)复制master中的三个组件启动脚本kube-apiserver.service、kube-controller-manager.service、kube-scheduler.service。
[root@localhost k8s]# scp /usr/lib/systemd/system/{kube-apiserver,kube-controller-manager,kube-scheduler}.service root@192.168.35.103:/usr/lib/systemd/system/
root@192.168.35.103's password:
kube-apiserver.service 100% 282 164.1KB/s 00:00
kube-controller-manager.service 100% 317 294.5KB/s 00:00
kube-scheduler.service 100% 281 352.0KB/s 00:00
(3)拷贝master1上已有的etcd证书给master2使用
特别注意:master2一定要有etcd证书,否则apiserver服务无法启动
[root@localhost k8s]# scp -r /opt/etcd/ root@192.168.35.103:/opt/
root@192.168.35.103's password:
etcd 100% 516 196.4KB/s 00:00
etcd 100% 18MB 82.4MB/s 00:00
etcdctl 100% 15MB 55.2MB/s 00:00
ca-key.pem 100% 1679 1.0MB/s 00:00
ca.pem 100% 1265 1.1MB/s 00:00
server-key.pem 100% 1679 2.0MB/s 00:00
server.pem 100% 1338 1.6MB/s 00:00
3、在master2上操作
(1)修改配置文件kube-apiserver中的IP
[root@localhost ~]# vim /opt/kubernetes/cfg/kube-apiserver
KUBE_APISERVER_OPTS="--logtostderr=true /
--v=4 /
--etcd-servers=https://192.168.35.100:2379,https://192.168.35.101:2379,https://192.168.35.102:2379 /
--bind-address=192.168.35.103 /
--secure-port=6443 /
--advertise-address=192.168.35.103 /
--allow-privileged=true /
--service-cluster-ip-range=10.0.0.0/24 /
--enable-admission-plugins=NamespaceLifecycle,LimitRanger,ServiceAccount,ResourceQuota,NodeRestriction /
--authorization-mode=RBAC,Node /
--kubelet-https=true /
--enable-bootstrap-token-auth /
--token-auth-file=/opt/kubernetes/cfg/token.csv /
--service-node-port-range=30000-50000 /
--tls-cert-file=/opt/kubernetes/ssl/server.pem /
--tls-private-key-file=/opt/kubernetes/ssl/server-key.pem /
--client-ca-file=/opt/kubernetes/ssl/ca.pem /
--service-account-key-file=/opt/kubernetes/ssl/ca-key.pem /
--etcd-cafile=/opt/etcd/ssl/ca.pem /
--etcd-certfile=/opt/etcd/ssl/server.pem /
--etcd-keyfile=/opt/etcd/ssl/server-key.pem"
(2)启动master2中的三个组件服务
[root@localhost ~]# systemctl start kube-apiserver.service
[root@localhost ~]# systemctl enable kube-apiserver.service
Created symlink from /etc/systemd/system/multi-user.target.wants/kube-apiserver.service to /usr/lib/systemd/system/kube-apiserver.service.
[root@localhost cfg]# systemctl status kube-apiserver.service
● kube-apiserver.service - Kubernetes API Server
Loaded: loaded (/usr/lib/systemd/system/kube-apiserver.service; enabled; vendor preset: disabled)
Active: active (running) since 六 2020-02-08 14:29:42 CST; 22s ago
Docs: https://github.com/kubernetes/kubernetes
Main PID: 3287 (kube-apiserver)
CGroup: /system.slice/kube-apiserver.service
└─3287 /opt/kubernetes/bin/kube-apiserver --logtostderr=true --v=4 --et...
2月 08 14:29:54 localhost.localdomain kube-apiserver[3287]: I0208 14:29:54.583442...
2月 08 14:29:54 localhost.localdomain kube-apiserver[3287]: I0208 14:29:54.585482...
2月 08 14:29:54 localhost.localdomain kube-apiserver[3287]: I0208 14:29:54.587185...
2月 08 14:29:54 localhost.localdomain kube-apiserver[3287]: I0208 14:29:54.588646...
2月 08 14:29:54 localhost.localdomain kube-apiserver[3287]: I0208 14:29:54.590160...
2月 08 14:29:54 localhost.localdomain kube-apiserver[3287]: I0208 14:29:54.591712...
2月 08 14:29:54 localhost.localdomain kube-apiserver[3287]: I0208 14:29:54.593487...
2月 08 14:29:54 localhost.localdomain kube-apiserver[3287]: I0208 14:29:54.598787...
2月 08 14:30:03 localhost.localdomain kube-apiserver[3287]: I0208 14:30:03.331185...
2月 08 14:30:03 localhost.localdomain kube-apiserver[3287]: I0208 14:30:03.333531...
Hint: Some lines were ellipsized, use -l to show in full.
[root@localhost ~]# systemctl start kube-controller-manager.service
[root@localhost ~]# systemctl enable kube-controller-manager.service
Created symlink from /etc/systemd/system/multi-user.target.wants/kube-controller-manager.service to /usr/lib/systemd/system/kube-controller-manager.service.
[root@localhost ~]# systemctl start kube-scheduler.service
[root@localhost ~]# systemctl enable kube-scheduler.service
Created symlink from /etc/systemd/system/multi-user.target.wants/kube-scheduler.service to /usr/lib/systemd/system/kube-scheduler.service.
(3)增加环境变量(在配置文件末行加入)
[root@localhost ~]# vim /etc/profile
export PATH=$PATH:/opt/kubernetes/bin/ ##添加
[root@localhost ~]# source /etc/profile ##重新加载
(4)查看群集中的节点
[root@localhost cfg]# kubectl get node
NAME STATUS ROLES AGE VERSION
192.168.35.101 Ready <none> 17m v1.12.3
192.168.35.102 Ready <none> 10m v1.12.3
原创文章,作者:kepupublish,如若转载,请注明出处:https://blog.ytso.com/183622.html