这篇文章主要介绍了oralce11g客户端如何安装，具有一定借鉴价值，感兴趣的朋友可以参考下，希望大家阅读完这篇文章之后大有收获，下面让小编带着大家一起了解一下。
首先确认操作系统防火墙和selinux已关闭：
–查看selinux状态：sestatus
关闭SELinux的方法：
修改/etc/selinux/config文件中的SELINUX="" 为 disabled ，然后重启。
如果不想重启系统，使用命令setenforce 0
–查看iptables状态：service iptables status
关闭防火墙
1)重启后永久性生效：
开启： chkconfig iptables on
关闭： chkconfig iptables off
2) 即时生效，重启后失效：
开启： service iptables start
关闭： service iptables stop
1. Memory Requirements：At least 256 MB of physical RAM.
# grep MemTotal /proc/meminfo
To determine whether the system architecture can run the software, enter the following command:
# grep "model name" /proc/cpuinfo
To determine the size of the configured swap space, enter the following command:
# grep SwapTotal /proc/meminfo
To determine the available RAM and swap space, enter the following command:
# free
2. Disk Space Requirements
The minimum disk space requirement for a client install in the /tmp directory is 400 MB.
To determine the amount of disk space available in the /tmp directory, enter the following command:
# df -k /tmp
Between 146 MB and 1.38 GB of disk space for the Oracle software, depending on the installation type:
Installation Type Requirement for Software Files
Instant Client 146 MB
Administrator 1.38 GB
Runtime 1.10 GB
3. Operating System Requirements
To determine the distribution and version of Linux installed, enter the following command:
# cat /proc/version
4. Kernel Requirements
For Asianux Server 3, Oracle Linux 5, and Red Hat Enterprise Linux 5:
2.6.18 or later
To determine whether the required kernel is installed, enter the following command:
# uname -r
5.Package Requirements
The following or later version of packages for Asianux Server 3, Oracle Linux 5, and Red Hat Enterprise Linux 5 should be installed:
binutils-2.17.50.0.6
compat-libstdc++-33-3.2.3
elfutils-libelf-0.125
elfutils-libelf-devel-0.125
elfutils-libelf-devel-static-0.125
gcc-4.1.2
gcc-c++-4.1.2
glibc-2.5-24
glibc-common-2.5
glibc-devel-2.5
ksh-20060214
libaio-0.3.106
libaio-devel-0.3.106
libgcc-4.1.2
libgomp-4.1.2
libstdc++-4.1.2
libstdc++-devel-4.1.2
make-3.81
sysstat-7.0.2
操作系统检查：
rpm -q binutils compat-libstdc++-33 elfutils-libelf elfutils-libelf-devel gcc gcc-c++ glibc glibc-common glibc-devel libaio libaio-devel libgcc libstdc++ libstdc++-devel make sysstat
[root@client ~]# rpm -q binutils compat-libstdc++-33 elfutils-libelf elfutils-libelf-devel gcc gcc-c++ glibc glibc-common glibc-devel libaio libaio-devel libgcc libstdc++ libstdc++-devel make sysstat
binutils-2.20.51.0.2-5.43.el6.x86_64
package compat-libstdc++-33 is not installed
elfutils-libelf-0.161-3.el6.x86_64
package elfutils-libelf-devel is not installed
package gcc is not installed
package gcc-c++ is not installed
glibc-2.12-1.166.el6.x86_64
glibc-common-2.12-1.166.el6.x86_64
glibc-devel-2.12-1.166.el6.x86_64
libaio-0.3.107-10.el6.x86_64
package libaio-devel is not installed
libgcc-4.4.7-16.el6.x86_64
libstdc++-4.4.7-16.el6.x86_64
package libstdc++-devel is not installed
make-3.81-20.el6.x86_64
sysstat-9.0.4-27.el6.x86_64
[root@client ~]#
yum install -y compat-libstdc++*
yum install -y elfutils-libelf-devel*
yum install -y gcc*
yum install -y libaio-devel*
yum install -y libstdc++-devel*
挂载光盘，配置yum源：
[root@client ~]# mount /dev/cdrom /mnt
mount: block device /dev/sr0 is write-protected, mounting read-only
[root@client ~]#
[root@client ~]# vi /etc/yum.repos.d/yum.repo
[base]
name=base
baseurl=file:///mnt/Server
enabled=1
gpgcheck=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release
[root@client yum.repos.d]#
[root@client yum.repos.d]#
[root@client yum.repos.d]# yum clean all
Loaded plugins: product-id, refresh-packagekit, security, subscription-manager
This system is not registered to Red Hat Subscription Management. You can use subscription-manager to register.
Cleaning repos: base
Cleaning up Everything
[root@client yum.repos.d]# yum list
省略…………………….
[root@client yum.repos.d]# yum makecache
Loaded plugins: product-id, refresh-packagekit, security, subscription-manager
This system is not registered to Red Hat Subscription Management. You can use subscription-manager to register.
base | 4.1 kB 00:00 …
base/group_gz | 211 kB 00:00 …
base/filelists_db | 3.4 MB 00:00 …
base/other_db | 1.3 MB 00:00 …
Metadata Cache Created
[root@client yum.repos.d]#
–安装缺失的包：
yum install -y compat-libstdc++*
yum install -y elfutils-libelf-devel*
yum install -y gcc*
yum install -y libaio-devel*
yum install -y libstdc++-devel*
6.Creating Required Operating System Groups and Users
添加用户组oinstall、和oracle用户：
[root@client Packages]# groupadd oinstall
[root@client Packages]# groupadd dba
[root@client Packages]# useradd -g oinstall -G dba oracle
[root@client Packages]# passwd oracle
Changing password for user oracle.
New password:
BAD PASSWORD: it is based on a dictionary word
BAD PASSWORD: is too simple
Retype new password:
passwd: all authentication tokens updated successfully.
[root@client Packages]#
7.Creating Required Directories
[root@client ~]# mkdir -p /u01/app/oracle
[root@client ~]# chown -R oracle:oinstall /u01/app/oracle/
[root@client ~]# chmod -R 775 /u01/app/oracle/
8.Configuring the oracle User's Environment配置用户环境变量
[oracle@client ~]$ vi .bash_profile
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
PATH=$PATH:$HOME/bin
export PATH
export ORACLE_BASE=/u01/app/oracle
export ORACLE_HOME=/u01/app/oracle/11.2/client
export NLS_LANG="american_america.ZHS16GBK"
export NLS_DATE_FORMAT="YYYY-MM-DD HH24:Mi:SS"
export LD_LIBRARY_PATH=$ORACLE_HOME/lib
~
".bash_profile" 15L, 235C written
[oracle@client ~]$
[oracle@client ~]$ source .bash_profile
[oracle@client ~]$
8.上传oracle客户端安装软件包：
[oracle@client ~]$ mkdir soft
[oracle@client ~]$ cd soft/
[oracle@client soft]$ ls
[oracle@client soft]$ pwd
/home/oracle/soft
[oracle@client soft]$
[oracle@client soft]$ ls
p13390677_112040_Linux-x86-64_4of7.zip
[oracle@client soft]$ unzip p13390677_112040_Linux-x86-64_4of7.zip
省略……………
9.配置静默安装响应文件
[oracle@client soft]$ ls
client p13390677_112040_Linux-x86-64_4of7.zip
[oracle@client soft]$ cd client/
[oracle@client client]$ ls
install readme.html response runInstaller stage welcome.html
[oracle@client client]$ cd response/
[oracle@client response]$ ls
client_install.rsp netca.rsp
[oracle@client response]$
–先备份响应文件：
[oracle@client response]$ cp client_install.rsp client_install.rsp.bak
[oracle@client response]$ ls
client_install.rsp client_install.rsp.bak netca.rsp
修改响应文件：
[oracle@client response]$ vi client_install.rsp
###############################################################################
## Copyright(c) Oracle Corporation 1998,2013. All rights reserved. ##
## ##
## Specify values for the variables listed below to customize ##
## your installation. ##
## ##
## Each variable is associated with a comment. The comment ##
## can help to populate the variables with the appropriate ##
## values. ##
## ##
###############################################################################
#——————————————————————————-
# Do not change the following system generated value.
#——————————————————————————-
oracle.install.responseFileVersion=/oracle/install/rspfmt_clientinstall_response_schema_v11_2_0
#——————————————————————————-
# This variable holds the hostname of the system as set by the user.
# It can be used to force the installation to use an alternative
# hostname rather than using the first hostname found on the system
# (e.g., for systems with multiple hostnames and network interfaces).
ORACLE_HOSTNAME=client
#——————————————————————————-
# Unix group to be set for the inventory directory.
UNIX_GROUP_NAME=oinstall
#——————————————————————————-
# Inventory location.
INVENTORY_LOCATION=/u01/app/oraInventory
#——————————————————————————-
# Specify the languages in which the components will be installed.
#
# en : English ja : Japanese
# fr : French ko : Korean
# ar : Arabic es : Latin American Spanish
# bn : Bengali lv : Latvian
# pt_BR: Brazilian Portuguese lt : Lithuanian
# bg : Bulgarian ms : Malay
# fr_CA: Canadian French es_MX: Mexican Spanish
# ca : Catalan no : Norwegian
# hr : Croatian pl : Polish
# cs : Czech pt : Portuguese
# da : Danish ro : Romanian
# nl : Dutch ru : Russian
# ar_EG: Egyptian zh_CN: Simplified Chinese
# en_GB: English (Great Britain) sk : Slovak
# et : Estonian sl : Slovenian
# fi : Finnish es_ES: Spanish
# de : German sv : Swedish
# el : Greek th : Thai
# iw : Hebrew zh_TW: Traditional Chinese
# hu : Hungarian tr : Turkish
# is : Icelandic uk : Ukrainian
# in : Indonesian vi : Vietnamese
# it : Italian
#
# all_langs : All languages
#
# Specify value as the following to select any of the languages.
# Example : SELECTED_LANGUAGES=en,fr,ja
#
# Specify value as the following to select all the languages.
# Example : SELECTED_LANGUAGES=all_langs
#——————————————————————————-
SELECTED_LANGUAGES=en,zh_CN
#——————————————————————————-
# Complete path of the Oracle Home
ORACLE_HOME=/u01/app/oracle/11.2/client
#——————————————————————————-
# Complete path of the Oracle Base.
ORACLE_BASE=/u01/app/oracle
#——————————————————————————-
#Name : INSTALL_TYPE
#Datatype : String
#Description: Installation type of the component.
#
# The following choices are available. The value should contain
# only one of these choices.
# – InstantClient
# – Administrator
# – Runtime
# – Custom
#
#Example : INSTALL_TYPE = "Administrator"
#——————————————————————————
oracle.install.client.installType=Administrator
#——————————————————————————-
#Name : oracle.install.client.upgrading
#Datatype : boolean
#Description: whether or not this is an upgrade installation
#
# The following choices are available. The value should contain
# only one of these choices.
# – true
# – false
#
#Example : oracle.install.client.upgrading=true
#——————————————————————————
oracle.install.client.upgrading=
#——————————————————————————
# Name : oracle.install.client.customComponents
# Datatype : StringList
#
# This property is considered only if INSTALL_TYPE is set to "Custom"
#
# Description: List of Client Components you would like to install
#
# The following choices are available. You may specify any
# combination of these choices. The components you choose should
# be specified in the form "internal-component-name:version"
# Below is a list of components you may specify to install.
#
# oracle.sqlj:11.2.0.4.0 — "Oracle SQLJ"
# oracle.rdbms.util:11.2.0.4.0 — "Oracle Database Utilities"
# oracle.javavm.client:11.2.0.4.0 — "Oracle Java Client"
# oracle.sqlplus:11.2.0.4.0 — "SQL*Plus"
# oracle.dbjava.jdbc:11.2.0.4.0 — "Oracle JDBC/THIN Interfaces"
# oracle.ldap.client:11.2.0.4.0 — "Oracle Internet Directory Client"
# oracle.rdbms.oci:11.2.0.4.0 — "Oracle Call Interface (OCI)"
# oracle.precomp:11.2.0.4.0 — "Oracle Programmer"
# oracle.xdk:11.2.0.4.0 — "Oracle XML Development Kit"
# oracle.network.aso:11.2.0.4.0 — "Oracle Advanced Security"
# oracle.assistants.oemlt:11.2.0.4.0 — "Enterprise Manager Minimal Integration"
# oracle.oraolap.mgmt:11.2.0.4.0 — "OLAP Analytic Workspace Manager and Worksheet"
# oracle.network.client:11.2.0.4.0 — "Oracle Net"
# oracle.network.cman:11.2.0.4.0 — "Oracle Connection Manager"
# oracle.network.listener:11.2.0.4.0 — "Oracle Net Listener"
# oracle.ordim.client:11.2.0.4.0 — "Oracle Multimedia Client Option"
# oracle.odbc:11.2.0.4.0 — "Oracle ODBC Driver"
# oracle.has.client:11.2.0.4.0 — "Oracle Clusterware High Availability API"
# oracle.dbdev:11.2.0.4.0 — "Oracle SQL Developer"
# oracle.rdbms.scheduler:11.2.0.4.0 — "Oracle Scheduler Agent"
#
#——————————————————————————-
oracle.install.client.customComponents="oracle.sqlj:11.2.0.4.0","oracle.rdbms.util:11.2.0.4.0","oracle.javavm.client:11.2.0.4.0","oracle.sqlplus:11.2.0.4.0","oracle.dbjava.jdbc:11.2.0.4.0","oracle.ldap.client:11.2.0.4.0","oracle.rdbms.oci:11.2.0.4.0","oracle.precomp:11.2.0.4.0","oracle.xdk:11.2.0.4.0","oracle.network.aso:11.2.0.4.0","oracle.assistants.oemlt:11.2.0.4.0","oracle.oraolap.mgmt:11.2.0.4.0","oracle.network.client:11.2.0.4.0","oracle.network.cman:11.2.0.4.0","oracle.network.listener:11.2.0.4.0","oracle.ordim.client:11.2.0.4.0","oracle.odbc:11.2.0.4.0","oracle.has.client:11.2.0.4.0","oracle.dbdev:11.2.0.4.0","oracle.rdbms.scheduler:11.2.0.4.0"
#——————————————————————————-
# Host name to be used for by the Oracle Scheduler Agent.
# This needs to be entered in case oracle.rdbms.scheduler is selected in the
# list of custom components during custom install
#
# Example : oracle.install.client.schedulerAgentHostName = acme.domain.com
#——————————————————————————
oracle.install.client.schedulerAgentHostName=
#——————————————————————————
# Port number to be used for by the Oracle Scheduler Agent.
# This needs to be entered in case oracle.rdbms.scheduler is selected in the
# list of custom components during custom install
#
# Example: oracle.install.client.schedulerAgentPortNumber = 1500
#——————————————————————————
oracle.install.client.schedulerAgentPortNumber=
#——————————————————————————
# Specify the auto-updates option. It can be one of the following:
# – MYORACLESUPPORT_DOWNLOAD
# – OFFLINE_UPDATES
# – SKIP_UPDATES
#——————————————————————————
oracle.installer.autoupdates.option=
#——————————————————————————
# In case MYORACLESUPPORT_DOWNLOAD option is chosen, specify the location where
# the updates are to be downloaded.
# In case OFFLINE_UPDATES option is chosen, specify the location where the updates
# are present.
#——————————————————————————
oracle.installer.autoupdates.downloadUpdatesLoc=
#——————————————————————————
# Specify the My Oracle Support Account Username which has the patches download privileges
# to be used for software updates.
#
# Example : AUTOUPDATES_MYORACLESUPPORT_USERNAME=abc@oracle.com
#——————————————————————————
AUTOUPDATES_MYORACLESUPPORT_USERNAME=
#——————————————————————————
# Specify the My Oracle Support Account Username password which has the patches download privileges
# to be used for software updates.
#
# Example : AUTOUPDATES_MYORACLESUPPORT_PASSWORD=password
#——————————————————————————
AUTOUPDATES_MYORACLESUPPORT_PASSWORD=
#——————————————————————————
# Specify the Proxy server name. Length should be greater than zero.
#
# Example : PROXY_HOST=proxy.domain.com
#——————————————————————————
PROXY_HOST=
#——————————————————————————
# Specify the proxy port number. Should be Numeric and at least 2 chars.
#
# Example : PROXY_PORT=25
#——————————————————————————
PROXY_PORT=
#——————————————————————————
# Specify the proxy user name. Leave PROXY_USER and PROXY_PWD
# blank if your proxy server requires no authentication.
#
# Example : PROXY_USER=username
#——————————————————————————
PROXY_USER=
#——————————————————————————
# Specify the proxy password. Leave PROXY_USER and PROXY_PWD
# blank if your proxy server requires no authentication.
#
# Example : PROXY_PWD=password
#——————————————————————————
PROXY_PWD=
#——————————————————————————
# Specify the proxy realm.
#
# Example : PROXY_REALM=metalink
#——————————————————————————
PROXY_REALM=
[oracle@client client]$
[oracle@client response]$
上面看起来内容较多，实际上主要就根据实际环境修改了这些值，其他默认或不填即可：
ORACLE_HOSTNAME=client
UNIX_GROUP_NAME=oinstall
INVENTORY_LOCATION=/u01/app/oraInventory
SELECTED_LANGUAGES=en,zh_CN
ORACLE_HOME=/u01/app/oracle/11.2/client
ORACLE_BASE=/u01/app/oracle
oracle.install.client.installType=Administrator
10.开始静默安装客户端
切换到安装目录下，执行下面的命令静默安装客户端
./runInstaller -silent -responseFile /home/oracle/soft/client/response/client_install.rsp
[oracle@client response]$ ls
client_install.rsp client_install.rsp.bak netca.rsp
[oracle@client response]$ pwd
/home/oracle/soft/client/response
[oracle@client response]$ cd ..
[oracle@client client]$ ls
install readme.html response runInstaller stage welcome.html
[oracle@client client]$ ./runInstaller -silent -responseFile /home/oracle/soft/client/response/client_install.rsp
Starting Oracle Universal Installer…
Checking Temp space: must be greater than 120 MB. Actual 19745 MB Passed
Checking swap space: must be greater than 150 MB. Actual 4095 MB Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2017-10-25_11-11-32AM. Please wait …[oracle@client client]$ You can find the log of this install session at:
/u01/app/oraInventory/logs/installActions2017-10-25_11-11-32AM.log
The installation of Oracle Client 11g was successful.
Please check '/u01/app/oraInventory/logs/silentInstall2017-10-25_11-11-32AM.log' for more details.
As a root user, execute the following script(s):
1. /u01/app/oraInventory/orainstRoot.sh
Successfully Setup Software.
[oracle@client client]$
root执行：
[root@client ~]# /u01/app/oraInventory/orainstRoot.sh
Changing permissions of /u01/app/oraInventory.
Adding read,write permissions for group.
Removing read,write,execute permissions for world.
Changing groupname of /u01/app/oraInventory to oinstall.
The execution of the script is complete.
[root@client ~]#
客户端安装完成！！！！！！
测试客户端：
–配置tns:
[oracle@client admin]$ cd $ORACLE_HOME/network/admin
[oracle@client admin]$ ls
samples shrept.lst
[oracle@client admin]$ vi tnsnames.ora
test =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.56.20)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = test)
)
)
~
"tnsnames.ora" [New] 8L, 171C written
[oracle@client admin]$
[oracle@client admin]$ tnsping test
TNS Ping Utility for Linux: Version 11.2.0.4.0 – Production on 25-OCT-2017 11:56:00
Copyright (c) 1997, 2013, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.56.20)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = test)))
OK (50 msec)
[oracle@client admin]$ sqlplus system/oracle@test
SQL*Plus: Release 11.2.0.4.0 Production on Wed Oct 25 11:56:25 2017
Copyright (c) 1982, 2013, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 – 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> show parameter name
NAME TYPE VALUE
———————————— ———– ——————————
cell_offloadgroup_name string
db_file_name_convert string
db_name string test
db_unique_name string test
global_names boolean FALSE
instance_name string test
lock_name_space string
log_file_name_convert string
processor_group_name string
service_names string service1,service2,service3
SQL>
感谢你能够认真阅读完这篇文章，希望小编分享的“oralce11g客户端如何安装”这篇文章对大家有帮助，同时也希望大家多多支持亿速云，关注亿速云行业资讯频道，更多相关知识等着你来学习!
原创文章，作者：3628473679，如若转载，请注明出处：https://blog.ytso.com/206493.html