前言
操作系统:Kylin Linux Advanced Server release V10 (Tercel)
elasticsearch-7.15.2
只允许普通用户操作,不允许root用户
注意:因为elasticsearch有远程执行脚本的功能所以容易中木马病毒,所以不允许用root用户启动,root用户是起不来的,赋权限,用一般的用户启动
要配置network.host才能别的机器或者网卡访问,否则只能是127.0.0.1或者localhost访问,这里配置成自己的局域网ip
注意:配置yml结尾的配置文件都需要冒号后面加空格才行
一、下载与解压
官网下载:https://www.elastic.co/cn/downloads/elasticsearch
注意下载的是aarch64版本的,并不是x86的。
将elasticsearch-7.15.2-linux-aarch64.tar.gz上传到服务器,并进行解压。
上传安装包:
将elasticsearch-7.15.2-linux-aarch64.tar.gz上传到 /usr/local/src
用Xftp软件连接登录部署es的服务器,进行安装包的上传
将安装包elasticsearch-7.15.2-linux-aarch64.tar.gz拖动到/usr/local/src文件夹中
Centos中查看有哪些用户
cut -d : -f 1 /etc/passwd
创建一个新用户
adduser elasticsearch
为新用户创建初始化密码
passwd elasticsearch
root用户解压文件
tar -zxvf elasticsearch-7.15.2-linux-aarch64.tar.gz
复制到指定目录下
cp -R elasticsearch-7.15.2 /usr/local/
设置授权范围
chown -R elasticsearch:elasticsearch /usr/local/elasticsearch-7.15.2/
二、修改配置文件
1、修改 elasticsearch.yml 设置elastic
命令:
vi /usr/local/elasticsearch-7.15.2/config/elasticsearch.yml
使用上面命令打开elasticsearch.yml,在此文件编辑如下所示相应配置:
# ======================== Elasticsearch Configuration ========================= # # NOTE: Elasticsearch comes with reasonable defaults for most settings. # Before you set out to tweak and tune the configuration, make sure you # understand what are you trying to accomplish and the consequences. # # The primary way of configuring a node is via this file. This template lists # the most important settings you may want to configure for a production cluster. # # Please consult the documentation for further information on configuration options: # https://www.elastic.co/guide/en/elasticsearch/reference/index.html # # ---------------------------------- Cluster ----------------------------------- # # Use a descriptive name for your cluster: # cluster.name: my-application # # ------------------------------------ Node ------------------------------------ # # Use a descriptive name for the node: # node.name: node-1 # # Add custom attributes to the node: # #node.attr.rack: r1 # # ----------------------------------- Paths ------------------------------------ # # Path to directory where to store the data (separate multiple locations by comma): # #path.data: /path/to/data # # Path to log files: # #path.logs: /path/to/logs # # ----------------------------------- Memory ----------------------------------- # # Lock the memory on startup: # #bootstrap.memory_lock: true # # Make sure that the heap size is set to about half the memory available # on the system and that the owner of the process is allowed to use this # limit. # # Elasticsearch performs poorly when the system is swapping the memory. # # ---------------------------------- Network ----------------------------------- # # By default Elasticsearch is only accessible on localhost. Set a different # address here to expose this node on the network: # network.host: 0.0.0.0 # # By default Elasticsearch listens for HTTP traffic on the first free port it # finds starting at 9200. Set a specific HTTP port here: # http.port: 9200 # # For more information, consult the network module documentation. # # --------------------------------- Discovery ---------------------------------- # # Pass an initial list of hosts to perform discovery when this node is started: # The default list of hosts is ["127.0.0.1", "[::1]"] # # discovery.seed_hosts: ["127.0.0.1", "host2"] # # Bootstrap the cluster using an initial set of master-eligible nodes: # cluster.initial_master_nodes: ["node-1"] # # For more information, consult the discovery and cluster formation module documentation. # # ---------------------------------- Various ----------------------------------- # # Require explicit names when deleting indices: # #action.destructive_requires_name: true
2、配置文件说明:
#集群名称
cluster.name: my-application
#节点名称
node.name: node-1
#当前节点所绑定的本机IP
network.host: 0.0.0.0
#初始化集群主节点
cluster.initial_master_nodes: [“node-1”]
注意:如果要配置集群需要两个节点上的elasticsearch配置的cluster.name相同,都启动可以自动组成集群,
这里如果不改cluster.name则默认是cluster.name=elasticsearch,nodename随意取但是集群内的各节点不能相同。
3、编辑 /etc/security/limits.conf,追加以下内容:
* soft nofile 65536 * hard nofile 65536 * soft nproc 4096 * hard nproc 4096
此文件修改后需要重新登录用户,才会生效
4、修改/etc/sysctl.conf:
vi /etc/sysctl.conf
使用上面命令打开/etc/sysctl.conf ,在此文件最下面加入如下所示配置:
vm.max_map_count=655360
保存后如下图所示:
执行如下所示命令:
sysctl -p
重新启动,成功。
三、启动ES
切换用户:
su elasticsearch
启动ES:
sh /usr/local/elasticsearch-7.15.2/bin/elasticsearch
后台启动:
sh /usr/local/elasticsearch-7.15.2/bin/elasticsearch -d
查看ES日志:
tail -f /usr/local/elasticsearch-7.15.2/logs/my-application.log
四、测试访问
本机访问:
[root@localhost ~]# curl 127.0.0.1:9200局域网访问,注意:关闭防火墙systemctl status firewalld五、设置开机启动
1、建立服务文件
vi /lib/systemd/system/elasticsearch.service[Unit] Description=elasticsearch [Service] LimitNOFILE=100000 LimitNPROC=100000 ExecStart=/usr/local/elasticsearch-7.15.2/bin/elasticsearch User=elasticsearch Group=elasticsearch [Install] WantedBy=multi-user.target2、设置开机自启动
重新加载systemd的守护线程:systemctl daemon-reload systemctl enable elasticsearch3、其它
启动elasticsearch.service: systemctl start elasticsearch.service 查看elasticsearch.serivce状态: systemctl status elasticsearch.serviceps aux|grepjava如果出现错误可以使用如下命令查看日志:journalctl -u elaticsearch.service原创文章,作者:端木书台,如若转载,请注明出处:https://blog.ytso.com/277708.html