exalogic备份exabr怎么用

这篇文章主要介绍exalogic备份exabr怎么用,文中介绍的非常详细,具有一定的参考价值,感兴趣的小伙伴们一定要看完!

[root@el02node01 bin]# ./exabr h

ExaBR   1.2.6 (b12259)

Usage: exabr <command> <targets> [options]

General options:

  –version                Display the exabr version

  –help                   Display this usage help and exit

Targets:

  Targets can be specified by listing the comma-separated IPs or hostnames or by using one of the predefined targets: 

  all-ib (all Infiniband switches), all-mgmt (all management (Cisco) switches), all-cn (all compute nodes and their ILOMs), 

  all-cn-iloms (all compute nodes ILOMS), all-sn (all storage nodes and their ILOMs), all-sn-iloms (all storage ILOMs),

  all-hw (all the hardware components), control-stack, user-vm (zfs snapshot)

  or all-itemized-vms (all user-vservers listed in the configuration file)

Common options:

  –repository, -r         path to the backup repository (any path, usually a mount to a NFS share)

                           (EXABR_REPO environment variable can be also used instead)

Commands:

init – initialize the exabr configuration file. Uses ECU data or the configuration of the given compute-node to obtain hostnames of different rack components

  exabr -r <repository-path> init <first-compute-node>

init-ssh, remove-ssh – establish or remove SSH public key authentication

  exabr -r <repository-path> init-ssh <targets>

  exabr -r <repository-path> remove-ssh <targets>

backup – back up the target to the backup repository

  exabr -r <repository-path> backup <targets> [–noprompt]

  exabr -r <repository-path> backup <compute-nodes> [–noprompt] [–exclude-paths </path>,..] [–include-paths </path>,..]

  exabr -r <repository-path> backup <itemized-vms> [–noprompt] [–exclude-paths </path>,..] [–include-paths </path>,..]

  Options:

    –noprompt, -n         never prompts for password, and skips the target instead if public key authentication has not been 

                           established (via init-ssh command)

    –exclude-paths        comma-separated list of directories or files that should not be included in the backup

    –include-paths        comma-separated exclusive list of directories and/or files to be backed up

    –timeout              timeout value in seconds to wait for the backup to complete. Default is 2700 seconds.

restore – restore the target from the backup repository 

  exabr -r <repository-path> restore <targets> [-b <backup-name>]

  exabr -r <repository-path> restore <compute-nodes> [-b <backup-name>] [–exclude-paths </path>,..] [–include-paths </path>,..]

  exabr -r <repository-path> restore <itemized-vms> [-b <backup-name>] [–exclude-paths </path>,..] [–include-paths </path>,..]

  exabr -r <repository-path> restore user-vm [-b <snapshot-name>] –vm <vm-name-or-uuid>

  exabr -r <repository-path> restore control-stack [-b <snapshot-name]

  Options:

    –backup, -b           the name of the specific backup to be restored. If option is not given, the latest backup is used. 

                           the backup name is shown in brackets by 'list' command.

    –exclude-paths        comma-separated list of directories or files that should not be restored from the backup

    –include-paths        comma-separated exclusive list of directories and/or files to be restored

    –vm                   name or uuid of the vm to restore from the named zfs snapshot. Restores entire disk image

    –timeout              timeout value in seconds to wait for the restore to complete. Default is 2700 seconds.

stop, start – stops or starts control stack VMs

  exabr -r <repository-path> stop control-stack

  exabr -r <repository-path> start control-stack

list – list the content of the backup repository 

  exabr -r <repository-path> list <targets> [–verbose]

  Options:

    –verbose, -v          display more details

ib-register – when the hardware component has been replaced and has a new Infiniband identity, register it with the Infiniband fabric

  exabr -r <repository-path> ib-register <targets> [–dry-run]

  Options:

    –dry-run              display the commands that would be run without performing them.

configure – configure and/or check the ECU networking settings for a re-imaged compute node

  exabr -r <repository-path> configure <target-compute-node>

control-unregister – unregister a compute-node from OVMM and from EMOC even if it is not reachable, or missing

  exabr -r <repository-path> control-unregister <target-compute-node>

control-register – register a live compute-node with OVMM and with EMOC

  exabr -r <repository-path> control-register <target-compute-node>

ERROR: Invalid arguments. Two arguments expected: <command> <targets>

以上为命令的帮助.

1.首先进行初始化

./exabr init 10.135.1623.200      <= first node of exalogic

2.对配置文件进行编辑

编辑/exalogic-lcdata/backups/exabr.config文件

3.对ib结点进行备份

[root@el02node01 bin]# ./exabr backup all-ib

ExaBR   1.2.6 (b12259)

Logging to file /root/exabr.log

————————

Using backup repository: /exalogic-lcdata/backups

Using configuration file: /exalogic-lcdata/backups/exabr.config

—————————————————

Targets: 3 total

Infiniband Gateway switch: el02gateway01.xx.cn, el02gateway02.xx.cn

Infiniband Spine switch: 10.135.173.239

—————————————————

—————————————————

(1 out of 3)

—————————————————

el02gateway01.fawcar.com.cn authentication successful

Backing up Infiniband Gateway switch el02gateway01.xx.com.cn

Destination directory: /exalogic-lcdata/backups/ib_gw_switches/el02gateway01.xx.com.cn/201812060805

—————————————————

Fetching firmware version

Backing up switch configuration

Backing up partitions

Generating md5 checksum

MD5 checksums created

OK: Infiniband Gateway switch el02gateway01.xx.com.cn backup successful (took: 7 seconds)

—————————————————

—————————————————

(2 out of 3)

—————————————————

el02gateway02.fawcar.com.cn authentication successful

Backing up Infiniband Gateway switch el02gateway02.xx.com.cn

Destination directory: /exalogic-lcdata/backups/ib_gw_switches/el02gateway02.fawcarxx.com.cn/201812060805

—————————————————

Fetching firmware version

Backing up switch configuration

Backing up partitions

Generating md5 checksum

MD5 checksums created

OK: Infiniband Gateway switch el02gateway02.xx.com.cn backup successful (took: 9 seconds)

—————————————————

—————————————————

(3 out of 3)

—————————————————

10.135.173.239 authentication successful

Backing up Infiniband Spine switch 10.135.173.239

Destination directory: /exalogic-lcdata/backups/ib_spine_switches/10.135.173.239/201812060805

—————————————————

Fetching firmware version

Backing up switch configuration

Backing up partitions

Generating md5 checksum

MD5 checksums created

OK: Infiniband Spine switch 10.135.173.239 backup successful (took: 4 seconds)

—————————————————

——————- SUMMARY ———————–

OK: 3 out of 3 finished successfully

—————————————————

4.对计算结点进行备份

[root@el02node01 bin]# ./exabr backup all-cn

5.对存储结点进行备份

[root@el02node01 bin]# ./exabr backup all-sn

6.对思科交换机备份

[root@el02node01 bin]# ./exabr backup all-mgmt 

7.备份硬件信息

[root@el02node01 bin]# ./exabr backup all-hw

以上是“exalogic备份exabr怎么用”这篇文章的所有内容,感谢各位的阅读!希望分享的内容对大家有帮助,更多相关知识,欢迎关注亿速云行业资讯频道!

原创文章,作者:carmelaweatherly,如若转载,请注明出处:https://blog.ytso.com/tech/database/206377.html

(0)
上一篇 2021年12月3日 00:14
下一篇 2021年12月3日 00:14

相关推荐

发表回复

登录后才能评论