原文地址：http://mechanical-sympathy.blogspot.com/2013/01/further-adventures-with-cas.html
In a previous article I reported what appeared to be a performance issue with CAS/LOCK instructions on the Sandy Bridge microarchitecture compared to the previous Nehalem microarchitecture. Since then I’ve worked with the good people of Intel to understand what was going on and I’m now pleased to be able to shine some light on the previous results.
I observed a small drop in throughput with the uncontended single-thread case, and an order-of-magnitude decrease in throughput once multiple threads contend when performing updates. This testing spawned out of observations testing Java Queue implementations and the Disruptor for the multi-producer case. I was initially puzzled by these findings because almost every other performance test I applied to Sandy Bridge indicated a major step forward for this microarchitecture.
After digging deeper into this issue it has come to light that my tests have once again fallen fowl of the difficulties in micro-benchmarking. My test is not a good means of testing throughput and it is actually testing fairness in a roundabout manner. Let’s revisit the code and work through what is going on.
Test Code
#include <time.h>
#include <pthread.h>
#include <stdlib.h>
#include <iostream>
typedef unsigned long long uint64;
const uint64 COUNT = 500 * 1000 * 1000;
volatile uint64 counter = 0;
void* run_add(void* numThreads)
{
register uint64 value = (COUNT / *((int*)numThreads)) + 1;
while (--value != 0)
{
__sync_add_and_fetch(&counter, 1);
}
}
void* run_xadd(void*)
{
register uint64 value = counter;
while (value < COUNT)
{
value = __sync_add_and_fetch(&counter, 1);
}
}
void* run_cas(void*)
{
register uint64 value = 0;
while (value < COUNT)
{
do
{
value = counter;
}
while (!__sync_bool_compare_and_swap(&counter, value, value + 1));
}
}
void* run_cas2(void*)
{
register uint64 value = 0;
register uint64 next = 0;
while (value < COUNT)
{
value = counter;
do
{
next = value + 1;
value = __sync_val_compare_and_swap(&counter, value, next);
}
while (value != next);
}
}
int main (int argc, char *argv[])
{
const int NUM_THREADS = atoi(argv[1]);
const int TESTCASE = atoi(argv[2]);
pthread_t threads[NUM_THREADS];
void* status;
timespec ts_start;
timespec ts_finish;
clock_gettime(CLOCK_MONOTONIC, &ts_start);
for (int i = 0; i < NUM_THREADS; i++)
{
switch (TESTCASE)
{
case 1:
std::cout << "LOCK ADD" << std::endl;
pthread_create(&threads[i], NULL, run_add, (void*)&NUM_THREADS);
break;
case 2:
std::cout << "LOCK XADD" << std::endl;
pthread_create(&threads[i], NULL, run_xadd, (void*)&NUM_THREADS);
break;
case 3:
std::cout << "LOCK CMPXCHG BOOL" << std::endl;
pthread_create(&threads[i], NULL, run_cas, (void*)&NUM_THREADS);
break;
case 4:
std::cout << "LOCK CMPXCHG VAL" << std::endl;
pthread_create(&threads[i], NULL, run_cas2, (void*)&NUM_THREADS);
break;
default:
exit(1);
}
}
for (int i = 0; i < NUM_THREADS; i++)
{
pthread_join(threads[i], &status);
}
clock_gettime(CLOCK_MONOTONIC, &ts_finish);
uint64 start = (ts_start.tv_sec * 1000000000) + ts_start.tv_nsec;
uint64 finish = (ts_finish.tv_sec * 1000000000) + ts_finish.tv_nsec;
uint64 duration = finish - start;
std::cout << "threads = " << NUM_THREADS << std::endl;
std::cout << "duration = " << duration << std::endl;
std::cout << "ns per op = " << (duration / (COUNT * 2)) << std::endl;
std::cout << "op/sec = " << ((COUNT * 2 * 1000 * 1000 * 1000) / duration) << std::endl;
std::cout << "counter = " << counter << std::endl;
return 0;
}
The code above makes it possible to test the major CAS based techniques on x86. For full clarity an objdump -d of the binary reveals the compiler generated assembly instructions for the above methods. The “lock” instruction in each section is where the atomic update is happening.
0000000000400dc0 <_z8run_cas2pv>: 400dc0: 48 8b 05 d9 07 20 00 mov 0x2007d9(%rip),%rax 400dc7: 66 0f 1f 84 00 00 00 nopw 0x0(%rax,%rax,1) 400dce: 00 00 400dd0: 48 8d 50 01 lea 0x1(%rax),%rdx 400dd4: f0 48 0f b1 15 c3 07 lock cmpxchg %rdx,0x2007c3(%rip) 400ddb: 20 00 400ddd: 48 39 c2 cmp %rax,%rdx 400de0: 75 ee jne 400dd0 <_z8run_cas2pv> 400de2: 48 3d ff 64 cd 1d cmp $0x1dcd64ff,%rax 400de8: 76 d6 jbe 400dc0 <_z8run_cas2pv> 400dea: f3 c3 repz retq 400dec: 0f 1f 40 00 nopl 0x0(%rax) 0000000000400df0 <_z7run_caspv>: 400df0: 48 8b 15 a9 07 20 00 mov 0x2007a9(%rip),%rdx 400df7: 48 8d 4a 01 lea 0x1(%rdx),%rcx 400dfb: 48 89 d0 mov %rdx,%rax 400dfe: f0 48 0f b1 0d 99 07 lock cmpxchg %rcx,0x200799(%rip) 400e05: 20 00 400e07: 75 e7 jne 400df0 <_z7run_caspv> 400e09: 48 81 fa ff 64 cd 1d cmp $0x1dcd64ff,%rdx 400e10: 76 de jbe 400df0 <_z7run_caspv> 400e12: f3 c3 repz retq 400e14: 66 66 66 2e 0f 1f 84 data32 data32 nopw %cs:0x0(%rax,%rax,1) 400e1b: 00 00 00 00 00 0000000000400e20 <_z8run_xaddpv>: 400e20: 48 8b 05 79 07 20 00 mov 0x200779(%rip),%rax 400e27: 48 3d ff 64 cd 1d cmp $0x1dcd64ff,%rax 400e2d: 77 1b ja 400e4a <_z8run_xaddpv> 400e2f: 90 nop 400e30: b8 01 00 00 00 mov $0x1,%eax 400e35: f0 48 0f c1 05 62 07 lock xadd %rax,0x200762(%rip) 400e3c: 20 00 400e3e: 48 83 c0 01 add $0x1,%rax 400e42: 48 3d ff 64 cd 1d cmp $0x1dcd64ff,%rax 400e48: 76 e6 jbe 400e30 <_z8run_xaddp> 400e4a: f3 c3 repz retq 400e4c: 0f 1f 40 00 nopl 0x0(%rax) 0000000000400e50 <_z7run_addpv>: 400e50: 48 63 0f movslq (%rdi),%rcx 400e53: 31 d2 xor %edx,%edx 400e55: b8 00 65 cd 1d mov $0x1dcd6500,%eax 400e5a: 48 f7 f1 div %rcx 400e5d: 48 85 c0 test %rax,%rax 400e60: 74 15 je 400e77 <_z7run_addpv> 400e62: 66 0f 1f 44 00 00 nopw 0x0(%rax,%rax,1) 400e68: f0 48 83 05 2f 07 20 lock addq $0x1,0x20072f(%rip) 400e6f: 00 01 400e71: 48 83 e8 01 sub $0x1,%rax 400e75: 75 f1 jne 400e68 <_z7run_addpv> 400e77: f3 c3 repz retq 400e79: 90 nop 400e7a: 90 nop 400e7b: 90 nop 400e7c: 90 nop 400e7d: 90 nop 400e7e: 90 nop 400e7f: 90 nop
To purely isolate the performance of the CAS operation the test should be run using the lock xadd option for an atomic increment in hardware. This instruction lets us avoid the spin-retry loop of a pure software CAS that can dirty the experiment.
I repeated the experiment from the previous article and got very similar results. Previously, I thought I’d observed a throughput drop even in the uncontended single-threaded case. So I focused in on this to confirm. To do this I had to find two processors that once Turbo Boost had kicked in then the clock speeds would be comparable. I found this by using a 2.8GHz Nehalem and 2.4GHz Sandy Bridge. For the single-threaded case they are both operating at ~3.4GHz.
Nehalem 2.8GHz
==============
$ perf stat ./atomic_inc 1 2
LOCK XADD
threads = 1
duration = 3090445546
ns per op = 3
op/sec = 323577938
Performance counter stats for './atomic_inc 1 2':
3085.466216 task-clock # 0.997 CPUs utilized
331 context-switches # 0.107 K/sec
4 CPU-migrations # 0.001 K/sec
360 page-faults # 0.117 K/sec
10,527,264,923 cycles # 3.412 GHz
9,394,575,677 stalled-cycles-frontend # 89.24% frontend cycles idle
7,423,070,202 stalled-cycles-backend # 70.51% backend cycles idle
2,517,668,293 instructions # 0.24 insns per cycle
# 3.73 stalled cycles per insn
503,526,119 branches # 163.193 M/sec
110,695 branch-misses # 0.02% of all branches
3.093402966 seconds time elapsed
Sandy Bridge 2.4GHz
===================
$ perf stat ./atomic_inc 1 2
LOCK XADD
threads = 1
duration = 3394221940
ns per op = 3
op/sec = 294618330
Performance counter stats for './atomic_inc 1 2':
3390.404400 task-clock # 0.998 CPUs utilized
357 context-switches # 0.105 K/sec
1 CPU-migrations # 0.000 K/sec
358 page-faults # 0.106 K/sec
11,522,932,068 cycles # 3.399 GHz
9,542,667,311 stalled-cycles-frontend # 82.81% frontend cycles idle
6,721,330,874 stalled-cycles-backend # 58.33% backend cycles idle
2,518,638,461 instructions # 0.22 insns per cycle
# 3.79 stalled cycles per insn
502,490,710 branches # 148.210 M/sec
36,955 branch-misses # 0.01% of all branches
3.398206155 seconds time elapsed
Analysis
So repeating the tests with comparable clock speeds confirmed the previous results. The single-threaded case shows a ~10% drop in throughput and the multi-threaded contended case displays an order-of-magnitude difference in throughput.
Now the big question is what is going on and why has throughput dropped? Well the single-threaded case suggests nothing major has happened to number of cycles required to execute the instruction when uncontended. The small differences could be attributed to system noise or the changes in the CPU front-end for Sandy Bridge with introduction of the additional load address generation unit.
For the multi-threaded case we found an interesting surprise when Intel monitored what the instructions are doing. We found that each thread on Nehalem was able to perform more updates in a batch before loosing the exclusive state on the cacheline containing the counter. This is because the inter-core latency has improved with Sandy Bridge so other threads are able to faster claim the cacheline containing the counter to do their own updates. What we are actually measuring with this micro-benchmark is how long a core can hold a cacheline before it is released to another core. Sandy Bridge is exhibiting greater fairness which is what you’d want in a real world application.
This micro-benchmark is very unrealistic for a real world application. Normally between performing counter updates a core would be doing a lot of other work. At the point when the counter needs to be updated the reduced latency inter-core would then be a benefit.
In all my macro application benchmarks Sandy Bridge has proved to have better performance than Nehalem at comparable clock speeds.
Conclusion
What did I learn from this? Well once again that writing micro-benchmarks is notoriously difficult. It is so hard to know what you are measuring and what effects can come into play. To illustrate how difficult it is to recognise such a flaw, for all those who have read this blog, no one has identified the issue and fed this back to me.
It also shows that what on first blush can be considered a performance bug is actually the opposite. This shows how it is possible to have a second order effect when a performance improvement can make a specific work case run more slowly.
原创文章，作者：Maggie-Hunter，如若转载，请注明出处：https://blog.ytso.com/tech/pnotes/141006.html